European overhead crane installation
European overhead crane installation notes
Crane is a kind of special equipment with high risk, Therefore, the following aspects you should pay more attention in the installation.
European overhead crane is a huge structure, complex equipment, often the crane is split when transport. Transport to the site and then whole assembly. The correct installation method must be adopted during installation to reflect the overall quality of the crane. When receiving the goods to check whether it is are complete, to ensure the integrity of the crane.
European overhead crane running on a square or building track. For the crane running track, the installation of the foundation, the crane itself, whether it can cooperate with each other intact? Play a key role in the operation should pay attention to crane adaptation, After the correct installation Test run and inspection of crane. The crane is the most important safety, so the safety device must be perfect, and to carefully check the correct installation, in order to achieve reliable, flexible, accurate technical requirements.
According to the importance of crane safety, so the safety device must be perfect, and to carefully check the correct installation, in order to achieve reliable, flexible, accurate technical requirements.
The crane is the most important safety, so the safety device must be perfect, and to carefully check the correct installation, in order to achieve reliable, flexible and accurate technical requirements.
According to the importance of crane safety work, in order to make the Crane put into use to meet the requirements of various load, It is necessary to carry out no-load, full load, overload static load and dynamic load test. These tests must be carried out in the operating state of the crane or in a particular stationary state. This requires that the crane can only be used after loading test.
Steel wire rope and other flexible parts and many other parts, Will occur after the initial load some elongation, deformation, loosening, etc. These tests must be carried out in the operating state of the crane or in a particular stationary state. This requires that the crane can only be used after loading test.
European overhead crane rope and other flexible parts and many other parts, will be carried out after the initial load of some elongation, deformation, loosening, etc. It is also required in the crane installation, after loading test. Therefore, we must do a good job of crane installation, commissioning, speed regulation and a series of work, in order to ensure the safe use of the crane in the future.