MH 20 Ton Gantry Crane Single Hoist Gantry Crane
MH 20 Ton Gantry Crane Single Hoist Gantry Crane
Customized single girder MH model gantry crane is used together with CD, MD type electric hoists. It is a track travelling small and medium sized crane.
Normally, single girder gantry crane lifting capacity:0.5ton~32ton,lifting height:3m~30m,span:3m~35m,working temperature is -20-40 ℃.
MH 20 Ton Gantry Crane Single Hoist Gantry Crane Detail features:
- On material: All compression structural part of crane’s components is made of high quality materials confirming with the regulations and standards, whose inspection report can be provided when required.
- On welding: The welding of steel structures will be strictly checked and inspected by specialist and the inspection reports also can be provided on requirement.
- On motor: Top brand motors are installed with good performance and with Class F insulation and IP54 protective class.
- On electric system: PLC control to all the mechanism and any speed requirement can be achieved.
- On control system: wireless control and pendant control can be your choices.
- On painting: 3 layers of painting is painted to protect the steel from rusting.
- On safety: Various protection measures are taken to ensure the safety of crane and operation.
Overload limit, height limit, rail end stop limit for traveling are used to protect mechanical system and short circuit protection, lose phase protection, low-voltage protection, power failure protection, over current protection are used to protect electric system.
Compared with bridge cranes, the product advantages of single girder gantry cranes are as follows:
- Reduce the construction cost of your workshop and workshop;
- Suitable for indoor warehouse and outdoor use;
Single girder gantry crane widely used in open ground,warehouse ,workshop to load and unload or grab materials. Its operation control model: Ground cable handle, Group wireless remote control, Cabin operation or among the two control model together with use